DC SERVO MOTORS
NOTE: These motors are new and surplus, Quantity are limited, E-mail me to check quantitys in stock..
Jensen 10511401 48 volt, date 1980 New
Nema size 23 DC brush motors with 4 mount screw holes on front.
Peak torque over 125 oz inch, 2 wires, 12 volts, 1.0 under load, over 120 rpms, Rated from 6 volts to 48 volts
Great for CNC, Robotics, size 5 inch long x 2.50 square inch front hub x 0.317 inch shaft.
Part# FBC-Jenson1 $45.00 each
If you need more than 2 motors or you are out of the USA please email me to place an order.
IMC Hansen MFG CO. 994206-0001, date 9015
Nema size 23 DC brush motors with 2 mount screw holes on front.
Peak torque over 125 oz inch, 2 wires, 12 volts, 3.0 under load, over 3600 rpms,
has a Encoder shaft. Great for CNC, Robotics, size 4 inch long x 2.25 inch dia x 1/4 inch shaft.
Part# FBC-MICRO22 $50.00 each
If you need more than 2 motors or you are out of the USA please email me to place an order.
The Parallax Continuous Rotation Servo is a Futaba S148 servo. It's recommended for robotics projects and includes an adjustable potentiometer to center the servo.
Servos may be controlled directly from a BASIC Stamp I/O pin by using the PULSOUT command. Servo has been modified for continuous rotation.
Technical Specifications: * Power 6vdc max * Average Speed 60 rpm (at 5vdc with no load)
* Weight 45.0 grams/1.59oz * Torque 3.40 kg-cm/47oz-in * Size mm (L x W x H) 40.5x20.0x38.0 * Size in (L x W x H) 1.60x.79x1.50
· Manual calibration screw ,
SERVO PDF FILE
.
Part# FBC-PAR1 SOLD OUT
IMC Hansen MFG CO. 211943-001 is the same as Litton Clifton Precision DC motor JDTH-2250-GB-1C
Nema size 23 DC brush motors with4 mount screw holes on front.
Peak torque 125 oz inch, 2 wires, 12 volts, 2.3 amps, 4700 rpms, has a Encoder shaft. Great for CNC, Robotics, size 3 inch long x 2 inch dia x 1/4 inch shaft.
Part# FBC-MICRO1 $40.00 each
If you need more than 2 motors or you are out of the USA please email me to place an order.Super Micro Ant Robot Motor
1.35 Volt, 75 ma P.M. Beeper Motor
Good hi torque beeper motor turns over to 7500 RPM @ 1.35 volts. Size 0.28 in dia x 0.89 in length.
Has a shaft that is 0.22 in length x 0.05 in dia, 2 rear micro mount holes..
Part# FBC-MICRO2 $8.00 each.
If you need more than 2 motors or you are out of the USA please email me to place an order.
12 Volt P.M. Hobby Motor
High torque hobbie motor turns up to 7200 RPM @ 12 volts. Operates from 6-12 volts. Is 1.08 in dia x 1.30 in length.
Has a sprial gear that is 1.0 in length x 0.22 in dia Front mount two screws.
Part# FBC-MOT3 $5.00 each.
If you need more than 2 motors or you are out of the USA please email me to place an order.
3 vdc Hobby Motor
Tape deck hobby motor, turns up to 3000 rpm @4 vdc. operates from 1.5v to 6 vdc. Size 1.0 dia x 0.75 long and
has a pully and frount mount bracket. Ideal for models, robots, toys.
Part# FB-MOT2 $5.00 ea.
If you need more than 2 motors or you are out of the USA please email me to place an order.